CPI Fiberglass Deadend and Tangent Crossarms

CPI Fiberglass Deadend and Tangent Crossarms

fiberglass deadend crossarms and tangent crossarmsCreative Pultrusions, Inc.  Manufacturers Fiberglass Deadend Tangent Crossarms

Creative Pultrusions is committed to providing extremely reliable pultruded crossarms. We would like to introduce our new logo and slogan.

 

Storm Strong Crossarm

 

 

“When the storm hits, is your grid; STORM STRONG™?"

 

 

 

Creative's Fiberglass Reinforced Polymer (FRP) STORM STRONG™ crossarms are RUS approved and have been engineered to meet the requirements of the National Electric Safety Code (NESC) and to increase grid reliability.

The FRP crossarms are lighter and stronger than wood crossarms. They will not rot or succumb to wood peckers or termites. The fiberglass crossarms exhibit an extremely high dielectric strength and contain no hazardous chemicals or pesticides. Most utilities find that the fiberglass crossarms provide the lowest installed cost. Many times, two wood arms can be replaced with a single fiberglass deadend crossarm and fiberglass tangent crossarm.

Fiberglass deadend crossarms are available in 3-5/8” x 4-5/8” and 4” x 6” rectangular sections. Fiberglass tangent crossarms are available in 3-1/2” x 4-1/2” , 3-5/8” x 4-5/8” and 4” x 6” rectangular cross sections. The 3-5/8” x 4-5/8” FRP  crossarms were developed to be the most cost effective and structurally efficient FRP crossarm available on the market! Our published values have been developed and fully evaluated per the requirements of ASTM D8019-15.

Our deadend crossarms are available with or without hardware. It is common for utilities to specify the crossarms predrilled with deadend phase hardware including washers, double-arm (DA) bolts, eye nuts and a prefabricated center mount. With design values published per the NESC code, our deadend crossarms are fabricated with CNC equipment under strict quality standards and contain a minimum of three layers of UV protection for superior, long-lasting performance. All material hardware and steel fabrications are hot dip galvanized per ASTM D153.

Creative’s FRP crossarms and poles can now be modeled within O-Calc Pro. O-Calc Pro is structural analysis software tool. Interested in designing your next FRP utility pole or crossarm with O-Calc Pro, learn more at http://www.osmose.com/o-calcpro.  

The Customer Requirement Crossarm Fabrication Sheet should be utilized to communicate all relevant order information to the manufacturing facility, Creative Pultrusions, Inc.

The excel spreadsheet needs to be filled and emailed to your Inside Account Manager. Instructions for completion are included in the Download below. For a complete list of available hardware and part numbers please refer to the Hardware and Accessories Catalog.


 


Click on Links Below to Download

Customer Requirement Crossarm Fabrication Sheet

  •  Customer Requirement Crossarm Fabrication Sheet -  Download | View

PowerPoint Presentation

  •  Pultruded Fiberglass Deadend, Tangent and Transmission Crossarms -  Download | View

Data Sheets

  •  CP3000 Fiberglass Reinforced Polymer (FRP) Tangent and Deadend Crossarm Data Sheet -  Download | View
  •  CP2500 Fiberglass Reinforced Polymer (FRP) Tangent and Deadend Crossarm Data Sheet -  Download | View
  •  CP2200 Fiberglass Reinforced Polymer (FRP) Tangent Crossarm Data Sheet -  Download | View

Product Technical Brochure

Hardware and Accessories Catalog